EDS-O2D1 Oxygen System with the High-Pressure CFF-480 Cylinder

Item number: 00EDS-0084-00 00EDS-0084-02

The EDS system consists of the following items: the silica fiber-wrapped oxygen cylinder with Full-Pack or Tuff-Pack, the XCR CGA-540 primary reducing regulator, low-pressure service line, the EDS-O2D1 unit and EDS cannula and EDS face mask and optionally the Drager face mask or ALPS FaceMask with or without a microphone. The EDS should be used with an XCR, XCP, or new 4-place FPR regulator for 2- and 4-place systems or RCR regulator for correct pressure and oxygen delivery. The low-pressure service line is a high quality polyurethane line that is kink-resistant and flexible under varying temperatures. The cannula, face mask and service line connect to the EDS unit via color-coded "Quick-Connects" providing an air-tight fitting by hand. These fittings can be connected and disconnected many times.

NOTE: Our EDS O2D2 and O2D1 are portable systems designed and calibrated to be used with our regulators (~15 psig. dynamic to 30 MAX. psig. static). However, if you wish to operate from the outlets of a built-in system, we offer the EDS-STR In-line stabilizing regulator. This will allow our portable EDS systems to operate with built-in systems that supply up to 125 psig. to the outlets in the aircraft.

Please Notice: The correct way to wear the EDS cannula is when the tab opposite of the two prongs on the cannula point down towards your upper lip. If it is not worn this way the EDS may not trigger with normal breathing efforts especially at higher altitudes.

Price $1275/1P, $1895/2P

Older information
EDSD1 Operating Manual: 12 page(s) B&W ~215K
EDSA1 Operating Manual: (Archive) 11 page(s) B&W ~90K