EDS-2 & 4ip Built-in Systems
have been FAA-CAMI tested
Item number: see below
EDS-2ip System
FAA-CAMI tested: EDS-2ip built-in Pulse Demand oxygen management systems are complete kits that include all you need to do high flight-level cross country flying with ultimate physiological safety. Kit includes the low-profile instrument panel or overhead-mountable EDS 2ip control head unit with a 2.25" X 2.25" form factor, two (2) remote-mountable oxygen outlet distributor units, the new IPR (Intelligent Peripheral Regulator) with our light-weight carbon-fiber-wrapped cylinder with a 48 cu. ft. capacity allowing many round-trips without oxygen refills. In addition, masks, cannulas, as well as necessary hardware and tubing are included. Also, the pilot station comes with our, FAA-CAMI flight-level 250 tested 'Pulse-Demand' ALPS Oxygen Face Mask that can be upgraded with a noise-canceling microphone at any time. You can add the Alps face mask with or without microphone for your co-pilot as well.
NOTE: The EDS ip systems automatically operate from a 12 or 24 Volt system at a mere 250 ma. of current. Therefore, if not specified, during your order the IPR will come with a 12 volt valve and the schematics will instruct that it be powered from the control head, via pin-19. The most preferred configuration. Otherwise the valve for the IPR must be specified for either 12 or 24 volt operation if you decide to power the IPR valve through system power and not from the control head. See reference schematics below.
Item #EDS2002-12 for 12 volt systems
Item #EDS2002-24 24 volt systems
Complete EDS-2ip System kit USD $4995
NEW kit scheduling Pricing Structure !
System can be ordered in scheduled segments or all at once. Call for details
EDS-2ip in a Lancair Legacy panel
Aerodynamics, LLC custom panels website
EDS-4ip System
EDS-4ip System
FAA-CAMI tested: EDS-4ip built-in Pulse Demand oxygen management systems are complete kits that include all you need to do high flight-level cross country flying with ultimate physiological safety. Kit includes the low-profile instrument panel or overhead-mountable EDS 4ip control head unit with a 2.25" X 3.125" vertical form factor, four (4) remote-mountable oxygen outlet distributor units, the new IPR (Intelligent Peripheral Regulator) with our light-weight carbon-fiber-wrapped cylinder with a 48 cu. ft. capacity allowing many round-trips without oxygen refills. In addition, masks, cannulas, as well as necessary hardware and tubing are included. Also, the pilot station comes with our, FAA-CAMI flight-level 250 tested Pulse-Demand ALPS FaceMask, that can be upgraded with a noise-canceling microphone at any time. You can also add the Alps face mask with or without microphone for all others as well.
NOTE: The EDS ip systems automatically operate from a 12 or 24 Volt system at a mere 250 ma. of current. Therefore, if not specified, during your order the IPR will come with a 12 volt valve and the schematics will instruct that it be powered from the control head, via pin-19. The most preferred configuration. Otherwise the valve for the IPR must be specified for either 12 or 24 volt operation if you decide to power the IPR valve through system power and not from the control head. See reference schematics below.
Complete EDS-4ip System kit USD $6495
NEW kit scheduling Pricing Structure !
System can be ordered in scheduled segments or all at once. Call for details
Item #EDS2004-12 12 volt system
Item #EDS2004-24 24 volt system
EDS-4ip in a Diamond TwinStar panel
 Get detailed information
EDS 2&4-ip Oxygen System Manual rev-3.3 (pdf: ~6.5Mb)
The EDSip system was tested up to 25,000 ft. by FAA-CAMI.
Because of the growing global popularity of our EDS products that use our pulse-demand oxygen delivery technology, the FAA, US ARMY and USAF decided that the pulse-demand oxygen delivery method needed to be tested. Therefore, it was, indeed, thoroughly tested at the FAA-CAMI research facility in Oklahoma City. However, the report has yet to be released by the government printing office. Meanwhile, we have been given permission by the doctors of this project at CAMI to share the draft version at this time. Since all of our EDS products use the same Pulse Demand delivery protocol technology, we felt that you may be interested in the results.
Get the CAMI report (pdf ~1.8Mb)
FAA-CAMI Evaluation / Testing of pulse oxygen systems (draft)
 
Get detailed information
Reference Schematics for IP System installations using the standard IPR.
EDS 2ip Basic Schematic with IPR.
EDS 2&4-ip Detailed Electrical Interface Schematic with IPR
EDS 2&4ip Physical Schematic with IPR
EDS 2ip Control Head Form-Factor
EDS 2&4ip DB24 Pin & Wire breakout detail
EDSip Oxygen Distributor Form-Factor
Get detailed information
Reference Schematics for IP System installations using the RCV/RCR.
EDS 2&4-ip Schematic with RCV/RCR wired using power externally from aircraft
EDS 2&4-ip Schematic with RCV/RCR wired using power from the control head
EDS 2ip system Basic Schematic with RCV/RCR.
Below is the standard oxygen pressure sending unit used on the EDS-ip systems
Below are the two 'D-Sub' connector types used in our current systems
|
