EDS O2D1 System
Item number:
EDS-O2D1
DID YOU KNOW?
Mountain High products are designed to aerospace specifications (SAE, AS, AIR, CGA and DIN) and not repackaged home health care products.
The basic EDS-O2D1 Pulse-Demand Oxygen system consists of the following items: the aluminum oxygen cylinder with Full-Pack or CMK mounting kit, the XCR primary reducing regulator, low-pressure service line, the EDS unit and the breathing cannula and face mask. The EDS-O2D1 should be used with an XCR, XCP, new 4-place FPR regulator for all 2- and 4-place systems, or RCR regulator for correct pressure and oxygen delivery. The low-pressure service line is a high quality polyurethane line that is kink-resistant and flexible under varying temperatures. The cannula, face mask and service line connect to the EDS unit via color-coded "Quick-Connects" providing an air-tight fitting by hand. These fittings can be connected and disconnected many times. With the optional XCP connecting kit, the EDS can be used with an XCP system at the same time flow meters are being used. In addition, the optional ALPS FaceMask, with or without microphone, is the perfect addition to any EDS system.
NOTE: Our EDS O2D2 and O2D1 are portable Pulse-Demand Oxygen systems designed and calibrated to be used with our regulators (~15 psig. dynamic to 30 MAX. psig. static). However, if you wish to operate from the outlets of a built-in system, we offer the EDS-STR stabilizing regulator. This will allow our portable EDS systems to operate with built-in systems that supply up to 125 psig. to the outlets in the aircraft.
Please Notice: The correct way to wear the EDS cannula is when the tab opposite of the two prongs on the cannula point down towards your upper lip. If it is not worn this way the EDS may not trigger with normal breathing efforts especially at higher altitudes.
|
